Fujifilm Instax Share Smartphone Printer SP-2 in Singapore Soon
The Fujifilm Instax Share Smartphone Printer SP-2 is finally going to be available in Singapore stores soon and I can’t wait to get hold on one of this baby. I even sold my Fujifilm Instax Share Smartphone Printer SP-1 away when i first heard the SP-2 from Fujirumor.com.
This Fujifilm Instax Share Smartphone Printer SP-2 is one of the most anticipated gadget for year 2016, especially for a street photographer like me, and i hope to share more of these beautiful instax with more strangers whom i shoot during my photo walk.
As i mentioned, the Fujifilm Instax Share Smartphone Printer SP-2 is surely an improvement from the SP-1 model. Here are the improvement worth mentioning.
High speed printing
I don’t care what technology Fujifilm had pumped, the Fujifilm Instax Share Smartphone Printer SP-2 is able to print out your Polaroid in 10 seconds, faster, less time consuming than SP-1
Picture Quality
High resolution with print pixels of 800 x 600 dots and of 320 dpi shows, meaning bigger resolution the better, more clear, more chripy image, means more chio
Battery
The Fujifilm Instax Share Smartphone Printer SP-2 uses the NP-45S battery and also allows to charge your battery via power bank. Woohoo… say goodbye to “hard to find” CR2 batteries.
Here’s the specification
| Recording method | 3-color exposure with OLED |
|---|---|
| Film | Fujifilm INSTAX mini instant color film (sold separately) |
| Photo capacity | 10 prints / pack |
| Image size | 62mm x 46mm |
| Supported image size | 800 x 600 dots |
| Printing resolution | 320 dpi |
| Printing levels | 256 levels per color (RGB) |
| Interface Standard compliance | IEEE802.11b/g, Operation frequency: 2.4GHz (5GHz is not supported.) |
| Supported image format | JPEG, PNG |
| Printing time Image | Recording – photo output (Feed out) Approx. 10 sec. |
| Approximate pringting capacity | Approx. 100 prints (Based on our test conditions) *Varies depending on the conditions of use. |
| Power supply | NP-45S(1 piece) |
| Charging time | Approx. 90 minutes (Varies depending on the battery remaining level) |
| Power consumption | 2 W |
| Operating temperature | +5°C to + 40°C / +41°F to + 104°F(no condensation) |
| Dimensions | 89.5mm x 131.8mm x 40mm (excluding projections) |
| Weight | 250g (without battery and film pack) |
| Supplied accessory | USB cable (BOB711) |
The Fujifilm Instax Share Smartphone Printer SP-2 should be available in Singapore market on end of July-2016 Available in Silver and Gold Retailing at @ $309.00
I finally got the Fujifilm Instax Share Smartphone Printer SP-2
Here’s a clip of my favorite Fujiguy talks about the SP-2
Sharing is Caring
Hello! May i know what does it mean by:
Approx. 100 prints (Based on our test conditions)
*Varies depending on the conditions of use.
Cheers
Hui Si
A fully charged battery can allows estimated 100 of instax prints